Сергей Шевцов (Все сообщения пользователя)

// проверка, установлено ли расстояние для выборки элементов
if ((int) $arParams["GPS_DIS"] > 0) { // $arParams["GPS_DIS"] радиус выборки в км

    // получаю координаты текущего элемента
    $arCoordCurItem = explode(",", $arResult["DISPLAY_PROPERTIES"]["COORD"]["VALUE"]);

    $gps_cur = array(
        "lat" => $arCoordCurItem[0],
        "lon" => $arCoordCurItem[1],
        "point_elevation" => 0
    );
   
    // выборка всех элементов
    $arSelect = Array("ID", "NAME", "DATE_ACTIVE_FROM", "DETAIL_PAGE_URL", "PROPERTY_COORD", "PREVIEW_PICTURE");
    $arFilter = Array(
        "IBLOCK_ID" => $arResult["IBLOCK_ID"],
        "ACTIVE_DATE" => "Y",
        "ACTIVE" => "Y",
        "!ID" => $arResult["ID"]
    );
    $res = CIBlockElement::GetList(Array("name" => "desk", "sort" => "ask"), $arFilter, false, false, $arSelect);
    while ($ob = $res->GetNextElement()) {
        $arFields = $ob->GetFields();
        if (isset($arFields["PROPERTY_COORD_VALUE"]) && strlen($arFields["PROPERTY_COORD_VALUE"]) > 0) {
            $arCoordItem = explode(",", $arFields["PROPERTY_COORD_VALUE"]);
            $gps_item = array(
                "lat" => $arCoordItem[0],
                "lon" => $arCoordItem[1],
                "point_elevation" => 0
            );

            // вычисляю расстояние между текущим местом и в выборке
            $distance = get_distance_between_2_points($gps_cur, $gps_item);

            // если растояние меньше или равно, то добавляю в массив
            if (($arParams["GPS_DIS"] * 1000) >= $distance) { 
                $arResult["ITEMS"][] = $arFields;
            } 
        }
    }
} 

//Вычисления расстояние между двумя точками земли, в GPS координатах стандарта WGS84
define('COORDINATES_FORMAT', 'WGS84'); 
define('MAJOR_AXIS', 6378137.0); //meters 
define('MINOR_AXIS', 6356752.3142); //meters 
define('MAJOR_AXIS_POW_2', pow(MAJOR_AXIS, 2)); //meters 
define('MINOR_AXIS_POW_2', pow(MINOR_AXIS, 2)); //meters 

/* 
$gps_1['lat'] - latitude (широта) 
$gps_1['lon'] - longitude (долгота) 
$gps_1['point_elevation'] (высота точки) // == 0 if this is sea. but must be defined! 
*/ 

//get arrays with gps coordinates, returns earth terrestrial distance between 2 points 
function get_distance_between_2_points($gps_1, $gps_2, $decart=false) 
{ 
    if(!$decart) 
    { 
        $true_angle_1 = get_true_angle($gps_1); 
        $true_angle_2 = get_true_angle($gps_2); 
         
        $point_radius_1 = get_point_radius($gps_1, $true_angle_1); 
        $point_radius_2 = get_point_radius($gps_2, $true_angle_2); 
         
        $earth_point_1_x = $point_radius_1 * cos(deg2rad($true_angle_1)); 
        $earth_point_1_y = $point_radius_1 * sin(deg2rad($true_angle_1)); 
         
        $earth_point_2_x = $point_radius_2 * cos(deg2rad($true_angle_2)); 
        $earth_point_2_y = $point_radius_2 * sin(deg2rad($true_angle_2)); 
         
        $x = get_distance_between_2_points(array('lat'=>$earth_point_1_x, 'lon'=>$earth_point_1_y), array('lat'=>$earth_point_2_x, 'lon'=>$earth_point_2_y), true); 
        $y = pi() *  (  ($earth_point_1_x + $earth_point_2_x) / 360 ) * ( $gps_1['lon'] - $gps_2['lon'] ); 

        return sqrt( pow($x,2) + pow($y,2) ); 
    } 
    else 
    { 
        return sqrt(pow(($gps_1['lat'] - $gps_2['lat']), 2) + pow(($gps_1['lon'] - $gps_2['lon']), 2)); 
    } 
} 

//returns degree's decimal measure, getting degree, minute and second 
function get_decimal_degree($deg=0, $min=0, $sec=0) 
{ 
    return ($deg<0) ? (-1*(abs($deg) + (abs($min)/60) + (abs($sec)/3600))) : (abs($deg) + (abs($min)/60) + (abs($sec)/3600)); 
} 

// get point, returns true angle 
function get_true_angle($gps) 
{ 
    return atan(    (  (MINOR_AXIS_POW_2 / MAJOR_AXIS_POW_2) * tan(deg2rad( $gps['lat']))    )  ) * 180/pi();  
} 

//get point and true angle, returns radius of small circle (radius between meridians)  
function get_point_radius($gps, $true_angle) 
{ 
    return (1 / sqrt((pow(cos(deg2rad($true_angle)), 2) / MAJOR_AXIS_POW_2) + (pow(sin(deg2rad($true_angle)), 2) / MINOR_AXIS_POW_2))) + $gps['point_elevation'];  
} 

function check_lat($lat) 
{ 
    if($lat>=0 && $lat<=90) 
    { 
        return 'north'; 
    } 
    else 
    if($lat>=-90 && $lat<=0) 
    { 
        return 'south'; 
    } 

    return false; 
} 

function check_lon($lon) 
{ 
    if($lon>=0 && $lon<=180) 
    { 
        return 'east'; 
    } 
    else 
    if($lon>=-180 && $lon<=0) 
    { 
        return 'west'; 
    } 

    return false; 

} 

<?
$arUrlRewrite = array(
         array(
      "CONDITION" => "#^/blogs/([0-9]+)/([0-9]+)/\?{0,1}(.*)\$#",
      "RULE" => "SECTION_ID=$1&ELEMENT_ID=$2",
      "ID" => "",
      "PATH" => "/blogs/detail.php",
   ),
        array(
      "CONDITION" => "#^/blogs/([0-9]+)/\?{0,1}(.*)\$#",
      "RULE" => "SECTION_ID=$1",
      "ID" => "",
      "PATH" => "/blogs/list.php",
   ),
);

?>

для раздела #SITE_DIR#/blogs/#SECTION_ID#/
для страницы #SITE_DIR#/blogs/#SECTION_ID#/#ELEMENT_ID#/

http://site.ru/blogs/13/?SECTION_ID=13&PAGEN_1=2

$GLOBALS['arrFilterDate'] = array('ACTIVE' => 'Y', '>=DATE_ACTIVE_FROM' => array(false, ConvertTimeStamp(false, "FULL"))); 

$APPLICATION->IncludeComponent(
"bitrix:news.list", 
".default", 
array(
...
"SORT_BY1" => "ACTIVE_FROM",
"SORT_ORDER1" => "ASC",
"SORT_BY2" => "SORT",
"SORT_ORDER2" => "ASC",
"FILTER_NAME" => "arrFilterDate",
...
),
 false
);?> 

   if(!CModule::IncludeModule("iblock"))die();
   
   $arSelect = Array("ID", "DATE_ACTIVE_FROM");
   $arFilter = Array("IBLOCK_ID"=> $arResult["ID"], "ACTIVE_DATE"=>"N", "ACTIVE"=>"Y");
   $res = CIBlockElement::GetList(Array(), $arFilter, false, false, $arSelect);
   // получаю список элементов, с просроченной датой и меняю у них год
   while($ob = $res->GetNextElement())
   {
      $arFields = $ob->GetFields();  
      $format = "DD.MM.YYYY";
      if ($arrTime = ParseDateTime($arFields["DATE_ACTIVE_FROM"], $format))
      {   
          $el = new CIBlockElement;
         $arLoadProductArray = Array(
            "DATE_ACTIVE_FROM"    =>  ConvertTimeStamp(mktime(0, 0, 0, $arrTime["MM"], $arrTime["DD"], date("Y")+1), "SHORT"), 
         );
         $resEl = $el->Update($arFields["ID"], $arLoadProductArray); 
      }
   } 

BX.showWait = function(node, msg) {
   тут созадние элемента 
};
BX.closeWait = function(node, obMsg) {
   тут удаление его
};

 RewriteCond %{HTTP_HOST} ^test.ru [NC]
 RewriteCond %{SERVER_PORT} !^443$
 RewriteRule .* https://test.ru/$1 [R,L]

 RewriteCond %{HTTP_HOST} ^www.test.ru [NC]
 RewriteCond %{SERVER_PORT} !^443$
 RewriteRule .* https://test.ru/$1 [R,L]