Форум

Коллеги еще..  9.0.10

Как такое лечить?
9 пункт потом 2....
[CODE] Bitrix virtual appliance version 9.0.10
                Certificate configuration

install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (you may need to install the DBD::mysql module) (@INC contains: /opt/webdir/lib /usr/local/lib64/perl5/5.32 /usr/local/share/perl5/5.32 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5) at (eval 315) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Mem, Pg, SQLite, Sponge.
at /opt/webdir/lib/bxSiteFiles.pm line 198.
Not sites on the server

[/CODE]

Коллеги, при обновлении до 9.0.10 или при установке..
получаем  ошибку  в логе...
[CODE]2026-04-02T10:39:18: 47195 : ====================================================================
2026-04-02T10:39:18: 47195 : Bitrix Environment for Linux installation script.
2026-04-02T10:39:18: 47195 : Yes will be assumed as a default answer.
2026-04-02T10:39:18: 47195 : Enter 'n' or 'no' for a 'No'. Anything else will be considered a 'Yes'.
2026-04-02T10:39:18: 47195 : This script MUST be run as root, or it will fail.
2026-04-02T10:39:18: 47195 : ============================================================­========
Failed to stop cockpit.service: Unit cockpit.service not loaded.
Failed to stop cockpit.socket: Unit cockpit.socket not loaded.
Failed to disable unit: Unit file cockpit.service does not exist.
Failed to disable unit: Unit file cockpit.socket does not exist.
error: package cockpit-packagekit is not installed
error: package cockpit-podman is not installed
error: package cockpit-storaged is not installed
error: package cockpit is not installed
error: package cockpit-ws is not installed
error: package cockpit-system is not installed
error: package cockpit-bridge is not installed
PMM2 Client release/x86_64 YUM repository       0.0  B/s |   0  B     02:04    
Errors during downloading metadata for repository 'pmm2-client-release-x86_64':
 - Curl error (28): Timeout was reached for http://repo.percona.com/pmm2-client/yum/release/9/RPMS/x86_64/repodata/repomd.xml [Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds]
Error: Failed to download metadata for repo 'pmm2-client-release-x86_64': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried
Removed "/etc/systemd/system/timers.target.wants/dnf-makecache.timer".
2026-04-02T10:41:24: 47195 : System update in progress. Please wait.
PMM2 Client release/x86_64 YUM repository       0.0  B/s |   0  B     02:04    
Errors during downloading metadata for repository 'pmm2-client-release-x86_64':
 - Curl error (28): Timeout was reached for http://repo.percona.com/pmm2-client/yum/release/9/RPMS/x86_64/repodata/repomd.xml [Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds]
Error: Failed to download metadata for repo 'pmm2-client-release-x86_64': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried
2026-04-02T10:43:29: 47195 : Error updating the system.
2026-04-02T10:43:29: 47195 : Log file path:  /tmp/bitrix-env-c8bVT.log

[/CODE]
Ну или...
[CODE][root@bitrixvm ~]# dnf clean all && dnf update -y
60 files removed
Bitrix Packages for Enterprise Linux 9 - x86_64                                                                         340 kB/s | 149 kB     00:00
Bitrix Packages Source for Enterprise Linux 9 - x86_64                                                                   21 kB/s | 7.1 kB     00:00
Node.js Packages for Linux RPM based distros - x86_64                                                                   1.2 MB/s | 1.1 MB     00:00
N|Solid Packages for Linux RPM based distros - x86_64                                                                   1.2 MB/s | 978 kB     00:00
CentOS Stream 9 - BaseOS                                                                                                2.4 MB/s | 8.9 MB     00:03
CentOS Stream 9 - AppStream                                                                                             590 kB/s |  27 MB     00:47
CentOS Stream 9 - CRB                                                                                                   1.9 MB/s | 8.0 MB     00:04
CentOS Stream 9 - Extras packages                                                                                        15 kB/s |  21 kB     00:01
Extra Packages for Enterprise Linux 9 - x86_64                                                                          4.5 MB/s |  20 MB     00:04
Extra Packages for Enterprise Linux 9 openh264 (From Cisco) - x86_64                                                    2.0 kB/s | 2.5 kB     00:01
PMM2 Client release/x86_64 YUM repository                                                                               0.0  B/s |   0  B     02:04
Errors during downloading metadata for repository 'pmm2-client-release-x86_64':
 - Curl error (28): Timeout was reached for http://repo.percona.com/pmm2-client/yum/release/9/RPMS/x86_64/repodata/repomd.xml [Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds]
Error: Failed to download metadata for repo 'pmm2-client-release-x86_64': Cannot download repomd.xml: Cannot download repodata/repomd.xml: All mirrors were tried

[/CODE]
Что делаем???  Коллеги прям АСАП!!

Для тех Кто столкнулся с проблемой после установки коробки на CentOS 9 - CONVERT TO CHARACTER SET utf8mb4
Вот Вам файлик с командами на все таблицы, для выполнения непосредсвенно внутри портала или из командной строки MySQL.

ВАЖНО!!! перед этим должны стоять следующие директивы. Если они не проставились в файлах Настройки.
- такое может быть если Вы установили сначала ДЕМО режим. Замечено при чистой установке.
.settings.php[CODE] 'utf_mode' =>
 array (
   'value' => true,
   'readonly' => true,
 ),
 'default_charset' =>
 array (
   'value' => false,
   'readonly' => false,
 ),[/CODE]/bitrix/php_interface/after-connect.php - создайте если нет.
[CODE]<?
$this->queryExecute("SET NAMES 'utf8mb4'");
$this->queryExecute("SET collation_connection = 'utf8mb4_0900_ai_ci'");
$this->queryExecute("SET innodb_strict_mode='OFF'");
$this->queryExecute("SET wait_timeout=28800");
?>[/CODE]dbconn.php - добавить если нет
[CODE]define("BX_UTF", true);
define("MYSQL_TABLE_TYPE", "INNODB");
define("BX_USE_MYSQLI", true);[/CODE]Ну и после... [URL=https://disk.yandex.ru/d/VgWZ3ZFL7LheWw]https://disk.yandex.ru/d/VgWZ3ZFL7LheWw[/URL]
[CODE]ALT ER TABLE b_admin_notify CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_0900_ai_ci;
.............................
.............................
ALT ER   TABLE b_xml_tree CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_0900_ai_ci;[/CODE]Удачи коллеги.

Алексей Шафранский,

Можно один из самых главных вопросов.
А где Генерация да и вообще работа с SSL????????????!!!!!!!!!??????
3. Настройка сертификатов (3. Configure certificates) - где этот заветный пункт...?

Как простите работать?
Ручками Ручками?...
А потом что?....